If you haven’t already done so, the ritual of irrigation blow out is certainly on everyone’s mind this time of year. This procedure signifies the end of another growing season along with the realization that winter and the accompanying freezing temperatures are probably right around the corner. Properly blowing out an irrigation system ensures that minimal damage will occur during the winter months. Although blow out is a yearly occurrence, there doesn’t seem to be a great deal of literature available about this important procedure. There seems to be various philosophies and most learn from field experience.
One aspect of blow out that has changed over the years is the pressu
re which the system is blown out. One reason for this change is the fact that sprinkler heads are now primarily comprised of plastic componts compared to their steel predecesors. As a result, the pressure which the system is blown out has been reduced. One way to help reduce the pressure is by using a pressure regulator.
The pressure regulator is usually mounted just off the compressor. The pressure can be monitored and adjusted by a handle on top of the regulator. I have often heard that 50 psi is sufficient to blow out most systems. Obviously, the higher the pressure, the greater the chance of causing damage to the piping system and the sprinkler heads. The other consequence of using higher pressures is coupled to the pressure of the compressor.
Compressors also have a pressure gauge and increasing the pressure of the reg
ulator will decrease the pressure inside the compressor and vice verca. Most compressors should not be operated under 80 psi. Under 80 psi, oil can blow past the seals in the compressor and enter the piping system. Of course you won’t realize this has happened until you charge the system in the spring and oil comes spewing out of sprinkler heads.
Let me know if you have any tips from the field concerning winterization of irrigation systems. Hope everyone has a safe and successful blowout.
One aspect of blow out that has changed over the years is the pressu
re which the system is blown out. One reason for this change is the fact that sprinkler heads are now primarily comprised of plastic componts compared to their steel predecesors. As a result, the pressure which the system is blown out has been reduced. One way to help reduce the pressure is by using a pressure regulator.The pressure regulator is usually mounted just off the compressor. The pressure can be monitored and adjusted by a handle on top of the regulator. I have often heard that 50 psi is sufficient to blow out most systems. Obviously, the higher the pressure, the greater the chance of causing damage to the piping system and the sprinkler heads. The other consequence of using higher pressures is coupled to the pressure of the compressor.
Compressors also have a pressure gauge and increasing the pressure of the reg
ulator will decrease the pressure inside the compressor and vice verca. Most compressors should not be operated under 80 psi. Under 80 psi, oil can blow past the seals in the compressor and enter the piping system. Of course you won’t realize this has happened until you charge the system in the spring and oil comes spewing out of sprinkler heads.Let me know if you have any tips from the field concerning winterization of irrigation systems. Hope everyone has a safe and successful blowout.
Marcus Jones
Graduate Research Assistant
1 comment:
Automatic Rain Irrigation recommends winterizing your system in October or early November.
Winterizing Irrigation System
Post a Comment